Van Bi Inox 3 Thân Điều Khiển Khí Nén Nối Ren
Thông Số Kỹ Thuật Van Bi Inox 3 Mảnh
Thân: inox 304
Bi : Inox 304
Trục : Inox 304
Seat : PTFE
Áp suất : 1000 psi
Kết nối : Ren BSPP / NPT
Nhiệt độ làm việc: Max 180 độ C
Điều khiển bằng khí nén Single Acting / Double Acting.
Phụ kiện đi kèm: Solenoid + Lọc khí (Air Regulator)
Các tên gọi khác: PNEUMATIC 3 PIECE BALL VALVE 1000 WOG SS304, FULL BORE, SCREW CONNECTION, PNEUMATIC CONTROL 3-PC BALL VALVE SS304, 3PC STAINLESS STEEL BALL VALVE PNEUMATIC ACTUATOR, PNEUMATIC ACTUATOR 3PC BALL VALVE
Van Bi INOX 304 - 316 Điều Khiển Khí Nén Nối Mặt Bích
Thông Số Kỹ Thuật Thân Van: 
Xem Tại: Van Bi INOX
Thông Số Kỹ Thuật Bộ Điều Khiển Điện
Actuator: Nhôm đúc
Type: Double Acting
Nguồn khí cấp: Max 8 kgf/cm2
Thân van: Inox SS316L, SS316, SS304, SS304L
Đệm van: PTFE, TFM1600,PEEK
Kết nối: Nối bích ASME B16.34 class 150, ASME B16.34 class 300 DIN PN16, PN25, PN40, JIS 10K, JIS16K, 20K
Áp suất làm việc: Max 10 kgf/cm2
Nhiệt độ làm việc: 180°C
Ứng dụng: Dùng cho Water, Oil, Alcohol, Neutral gas, Liquid, Acid..etc
Bộ điều khiển khí nén ( Pneumatic Actuator)
Tác động kép van bi điều khiển khí nén ( Double acting)
Tác động đơn ( Single acting): Single-acting actuator ( the ones with springs) have 2 ports as well. One is connected to the actuation side, the other to spring chamber
Kích thước: DN15 – 052DA, DN20 – 052DA, DN25 – 052DA, DN25 – 063DA, DN32 – 063DA, DN32 – 075DA, DN40 – 075DA, DN40 – 083DA, DN50 – 083DA, DN50 – 092DA, DN65 – 092DA, DN80 – 092DA, DN80 – 105DA, DN100 – 105DA, DN100 – 125DA
Ưu điểm Van Bi Điều Khiển Khí Nén:
Độ an toàn cao không xảy ra hiện tượng cháy nổ.
Chịu được áp lực làm việc rất lớn.
Thích hợp với nhiều môi trường làm việc khác nhau như: khí nén, nước sạch, nước thải,…
Nhược Điểm Van Bi Điều Khiển Khí Nén:
Van bi inox điều khiển khí nén có chi phí cao.
Van Bi Inox 3PC Điều Khiển Khí Nén Với Lò Xo / Stainless Steel Spring Return Ball Valve
High performance 3 piece full bore 316 Stainless Steel ball valve with BSP threaded connections and a spring return pneumatic actuator. Self adjusting stem packing assembly with Belleville spring for temperature fluctuations and vibration. Pre drilled metric hole on ISO5211 direct mounting pad to minimise any thermal transfer from valve to actuator. Reinforced PTFE seats for temperatures up to 180°C. Anodised aluminium spring return pneumatic actuator which allows a fail safe position if air is lost. Typical applications include water treatment, chemical, marine, petrochemical and general industry. Length to DIN3202-M3 and Threads to ISO7/1. Watermark valves available upon request, contact Sales for more information. Watermark License Number WMK26529 approved to WMTS 012:2018.
DESCRIPTION
Size 1/4" to 4" BSP
Body 316 Stainless Steel 3 piece
Seat Reinforced PTFE
Pressure 63 BAR
Temperature -20°C to 180°C
Actuation Spring Return Pneumatic
Cấu Tạo:
| Item | Article | Material |
|---|---|---|
| 1 | Visual Indicator | UV Stabilised Thermoplastic |
| 2 | Adjustable Stops | Stainless Steel |
| 3 | Supply Ports | Threaded & Namur Interface |
| 4 | Drive | 316 Stainless Steel |
| 5 | Chevron Seals | Reinforced Teflon |
| 6 | Backing O-ring | Viton |
| 7 | Thrust Washer | Reinforced Teflon |
| 8 | ISO Mounting Pad | 316 Stainless Steel |
| 9 | Tie Rods | 316 Stainless Steel |
| 10 | Washer | 316 Stainless Steel |
| 11 | Nut | 316 Stainless Steel |
| 12 | Ball | Polished 316 Stainless Steel |
| 13 | Seats | Reinforced Teflon |
| 14 | Body | 316 Stainless Steel |
Stainless Steel Fire Safe Ball Valve Double Acting Pnuematic ANSI 150 Flanged
Van Bi Inox Điều Khiển Khí Nén Chống Cháy Nổ
High quality 316 Stainless Steel ANSI 150 flanged 2 way ball valve with a direct mounted double acting pneumatic actuator. This allows the user to air open/air close the ball valve. Features reinforced Teflon seats (RTFE) allowing it to handle media up to 180°C and an anodised aluminium actuator with visual indicator. Ball valve designed & manufactured to ANSI B16.34, face to face complies with ANSI B16.10, flange ends comply with ANSI B16.5 and testing and inspection according to API598. Great for fuel applications, pipelines, water treatment and general industry. Ball valve Firesafe Approved API607 Sixth Edition, Cert. No 230679.
| Size (mm) | Actuator | Media Pressure | Media Temperature | Actuator Pressure |
|---|---|---|---|---|
| 15 | DA50 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 20 | DA50 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 25 | DA50 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 32 | DA63 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 40 | DA63 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 50 | DA75 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 63 | DA88 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 80 | DA100 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 100 | DA115 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 125 | DA125 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 150 | DA145 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 200 | DA160 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 250 | DA200 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 300 | DA240 | Vacuum (29" Hg) to 20 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
FEATURES
Size: 15mm to 300mm
Body: 316 Stainless Steel
Seat: PTFE
Pressure: 20 Bar @ ambient
Temperature: -20°C to 180°C
Actuation: Double Acting Pnuematic
Fire Safe API607 Approved
CẤU TẠO:
| Number | Item | Material |
|---|---|---|
| 1 | Visual Indicator | UV Stabilised Thermoplastic |
| 2 | Adjustable Stops | 316 Stainless Steel |
| 3 | Double Acting Pneumatic Actuator | Anodized Aluminium |
| 4 | Pressure Ports / Namur Interface | Anodized Aluminium |
| 5 | Chevron Seals | Pure Graphite |
| 6 | Backing O-ring | Viton |
| 7 | Thrust Washer | Pure PTFE |
| 8 | Ball | Polished 316 Stainless Steel |
| 9 | Seats | Pure PTFE |
| 10 | Mounting Pad | 316 Stainless Steel |
| 11 | Body | 316 Stainless Steel |
| 12 | Flange | 316 Stainless Steel |
Stainless Steel Ball Valve Pneumatic Actuated Double Acting Threaded Ends
Van Bi INOX 316 3 Thân Điều Khiển Khí Nén 2 Tác Động Nối Ren
High performance 3 piece full bore 316 Stainless Steel ball valve with BSP threaded connections and a double acting pneumatic actuator. Self adjusting stem packing assembly with Belleville spring for temperature fluctuations and vibration. Pre drilled metric hole on ISO5211 direct mounting pad to minimise any thermal transfer from valve to actuator. Reinforced PTFE seats for temperatures up to 180°C. Anodised aluminium double acting pneumatic actuator. Typical applications include water treatment, chemical, marine, petrochemical and general industry. Length to DIN3202-M3 and Threads to ISO7/1. Watermark valves available upon request, contact Sales for more information. Watermark License Number WMK26529 approved to WMTS 012:2018.
FEATURES
Size 1/4" to 4" BSP
Body 316 Stainless Steel 3 piece
Seat Reinforced PTFE
Pressure 63 BAR
Temperature -20°C to 180°C
Actuation Double Acting Pneumatic
| Size (BSP) | DN (mm) | Actuator | Media Pressure | Media Temperature | Actuator Pressure |
|---|---|---|---|---|---|
| 1/4 | 8 | DA50 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 3/8 | 10 | DA50 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 1/2 | 15 | DA50 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 3/4 | 20 | DA50 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 1 | 25 | DA50 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 1 ¼ | 32 | DA63 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 1 ½ | 40 | DA63 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 2 | 50 | DA75 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 2 ½ | 65 | DA88 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 3 | 80 | DA100 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
| 4 | 100 | DA115 | Vacuum (29" Hg) to 63 BAR (10 BAR Steam) | -20°C to 180°C | 6 to 8 BAR |
CẤU TẠO
| Item | Article | Material |
|---|---|---|
| 1 | Visual Indicator | UV Stabilised Thermoplastic |
| 2 | Adjustable Stops | Stainless Steel |
| 3 | Supply Ports | Threaded & Namur Interface |
| 4 | Drive | 316 Stainless Steel |
| 5 | Chevron Seals | Reinforced Teflon |
| 6 | Backing O-ring | Viton |
| 7 | Thrust Washer | Reinforced Teflon |
| 8 | ISO Mounting Pad | 316 Stainless Steel |
| 9 | Tie Rods | 316 Stainless Steel |
| 10 | Washer | 316 Stainless Steel |
| 11 | Nut | 316 Stainless Steel |
| 12 | Ball | Polished 316 Stainless Steel |
| 13 | Seats | Reinforced Teflon |
| 14 | Body | 316 Stainless Steel |
Stainless Steel Ball Valve, Spring Return Pneumatic Operation ANSI 150 Flanged
Van Bi INOX Chống Cháy Nổ Điều Khiển Khí Nén Lắp Bích ANSI 150
Two piece two way ANSI 150 lb flanged fire safe approved ball valve, spring return pneumatic operation. 316 Stainless Steel body, PTFE seats, FKM backing ring, live loaded packing and anti static device. Ball valve designed & manufactured to ANSI B16.34, face to face complies with ANSI B16.10, flange ends comply with ANSI B16.5 and testing and inspection according to API598. Firesafe Approved API607 Sixth Edition, Cert. No 230679. Direct coupled anodised aluminium pneumatic spring return actuator with visual indicator. Media temp -20°C to 180°C.
FEATUERS
Size: 15mm to 250mm
Body: 316 Stainless Steel
Seat: PTFE
Pressure: 150 pound
Temperature: -20°C to 180°C
Actuation: Spring Return Pneumatic
Fire Safe API607 Approved
CẤU TẠO
| Item | Article | Material |
|---|---|---|
| 1 | Visual Indicator | UV Stabilised Thermoplastic |
| 2 | Adjustable Stops | 316 Stainless Steel |
| 3 | Spring Return Pneumatic Actuator | Sealed Aluminium |
| 4 | Pressure Ports / Namur Interface | Sealed Aluminium |
| 5 | Chevron Seals | Pure Graphite |
| 6 | Backing O-ring | Viton |
| 7 | Thrust Washer | Pure PTFE |
| 8 | Ball | Polished 316 Stainless Steel |
| 9 | Seats | Pure PTFE |
| 10 | Mounting Pad | 316 Stainless Steel |
| 11 | Body | 316 Stainless Steel |
| 12 | Flange | 316 Stainless Steel |
Stainless Steel Ball Valve, Penumatic Actuator Double Acting, ANSI 300 Flanged
Van Bi INOX Điều Khiển Khí Nén 2 Tác Động Lắp Bích ANSI 3000
Two piece two way ANSI 300lb flanged fire safe approved ball valve,with anodised aluminium double acting penumatic actuator, visual indicator & solid ball. 316 Stainless Steel body, PTFE seats, FKM backing ring, live loaded packing and anti static device. Firesafe Approved API607 Sixth Edition, Cert. No 218781. ISO5211 Mounting Pad allowing direct coupling of actuation. Great for fuel applications, pipelines, water treatment and general industry.
Design & Manufacture to ANSI B16.34
Face to Face comply with ANSI B16.10
Flange Ends comply with ANSI B16.5
Inspection & Testing in accordance wtih API598
FEATUERS
Size: 15mm to 100mm
Body: 316 Stainless Steel
Seat: PTFE
Pressure: 50 Bar @ ambient
Temperature: -20°C to 180°C
Actuation: Double Acting Pnuematic
Fire Safe API607 Approved
CẤU TẠO
| Number | Item | Material |
|---|---|---|
| 1 | Visual Indicator | UV Stabilised Thermoplastic |
| 2 | Adjustable Stops | 316 Stainless Steel |
| 3 | Double Acting Pneumatic Actuator | Anodized Aluminium |
| 4 | Pressure Ports / Namur Interface | Anodized Aluminium |
| 5 | Chevron Seals | Pure Graphite |
| 6 | Backing O-ring | Viton |
| 7 | Thrust Washer | Pure PTFE |
| 8 | Ball | Polished 316 Stainless Steel |
| 9 | Seats | Pure PTFE |
| 10 | Mounting Pad | 316 Stainless Steel |
| 11 | Body | 316 Stainless Steel |
| 12 | Flange | 316 Stainless Steel |
Stainless Steel Ball Valve, Fire Safe, Spring Return, ANSI 300 Flanged
Van Bi Điều Khiển Khí Nén 1 Tác Động Lắp Mặt Bích ANSI Class 300
Two piece two way ANSI 300lb flanged fire safe approved ball valve,with anodised aluminium srping return penumatic actuator, visual indicator & solid ball. 316 Stainless Steel body, PTFE seats, FKM backing ring, live loaded packing and anti static device. Firesafe Approved API607 Sixth Edition, Cert. No 218781. ISO5211 Mounting Pad allowing direct coupling of actuation. Great for fuel applications, pipelines, water treatment and general industry.
Design & Manufacture to ANSI B16.34
Face to Face comply with ANSI B16.10
Flange Ends comply with ANSI B16.5
Inspection & Testing in accordance wtih API598
FEATUERS
Size: 15mm to 100mm
Body: 316 Stainless Steel
Seat: PTFE
Pressure: 50 Bar @ ambient
Temperature: -20°C to 180°C
Actuation: Spring Return Pnuematic
Fire Safe API607 Approved
CẤU TẠO
| Number | Item | Material |
|---|---|---|
| 1 | Visual Indicator | UV Stabilised Thermoplastic |
| 2 | Adjustable Stops | 316 Stainless Steel |
| 3 | Double Acting Pneumatic Actuator | Anodized Aluminium |
| 4 | Pressure Ports / Namur Interface | Anodized Aluminium |
| 5 | Chevron Seals | Pure Graphite |
| 6 | Backing O-ring | Viton |
| 7 | Thrust Washer | Pure PTFE |
| 8 | Ball | Polished 316 Stainless Steel |
| 9 | Seats | Pure PTFE |
| 10 | Mounting Pad | 316 Stainless Steel |
| 11 | Body | 316 Stainless Steel |
| 12 | Flange | 316 Stainless Steel |
